Ozone Generator
Ozone production from 4 to 8 gO3 / h - Ozone concentration from 8 to 60 mg / l
The ozone generator, which can be wall or bench mounted, can be supplied with compressed air (4 gO3 / h production) or with oxygen (8 gO3 / h production) depending on the ozone concentration output desired.
The laboratory ozone generator is provided with CERTIFICATION OF CONFORMITY in accordance with the EC directives: Machinery Directive 2006/42 / EC and the EMC certification 2014/30 / EU
The generator requires a power outlet and can be powered with:
- Compressed air (oil-free; 7 bar; 5 - 30 ° C)
- LOX or PSA oxygen
Model: GEO4
Typical compressed air supply: 10 l / min (oil-free; 7 bar; 5 - 30 ° C)
Alternatively, PSA or LOX power supply: see PSA accessory card
Power supply: 220V - 50 HZ
Installed electrical power: 120 W
Dimensions (Dia. X Length): 330 x 150 X 280 mm
The generator includes:
Supply gas flow meter,
Supply and outlet gas pressure gauge
High efficiency ceramic dielectric housed in a finned heat sink capable of reducing the temperature generated by ozone production
Local potentiometer for the variation of the ozone concentration produced (range from 20% - 100% production)
Air pre-treatment system consisting of 3 safety filters (where two are to remove any oil) and a membrane dryer to reduce the incoming humidity up to an extremely low dewpoint.
CERTIFICATION OF CONFORMITY in accordance with EC directives: Machinery Directive 2006/42 / EC and EMC certification 2014/30 / EU
Weight: 10.00 kg
Model list
Ozone generator for laboratory use, from 4 to 8 gO3/h
Feed: Air/oxigen; Ozone concentration from 8 up to 60 mg/l