Injectors
The injectors are components inserted on hydraulic circuits in order to create depression (and therefore suck gas/liquid) in a high speed area of the liquid motor fluid (Venturi effect).
Due to the high turbulence, microbubbles are created and therefore very high gas/liquid material exchange coefficients are obtained.
The injectors are suitable for solubilization in a fluid (liquid) of:
- a gaseous fluid (eg air, oxygen, ozone, carbon dioxide)
- a liquid fluid (eg water, detergents, process liquids)
The proposed injectors are made of PP (standard one)
or in PVDF material which is very resistant to corrosive liquids/gases (acids) and strong oxidizers (such as ozone).
Model list
Injector PVDF 287 1/2"
Connections 1/2 ”FM - Suc. gas 0,94 l / min - Suc. liquid 0,39 l / min
Injector PVDF 384 1/2"
Connections 1/2" FM - Suc. gas 3,1 l / min - Suc. liquid 0,96 l / min
Injector PP model 584
Polypropylene - Connections 3/4” FM - Suc. gas 8,2 l/min - Suc. liquid 1,7 l/min
Injector PVDF 684 0,75"
Connections 0,75” FM - Suc. gas 8,3 l/min - Suc. liquid 1,7 l/min
Injector PVDF 784 0,75"
Connections 0,75" FM - Suc. gas 13,6 l/min - Suc. liquid 2,13 l/min
Injector PVDF 978 1"
Connections 1” FM - Suc. gas 17,9 l/min - Suc. liquid not declared
Injector PP model 1078
Polypropylene - Connections 1” FM - Suc. gas 22,9 l/min - Suc. liquid 6,3 l/min
Injector PP model 2081
Polypropylene - Connections 2” FM - Suc. gas 247 l/min - Suc. liquid 39,7 l/min